WOW...that was fast!!!
Thanks, Mate
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Woolson Neck Tenon Jig http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=9087 |
Page 1 of 1 |
| Author: | JJ Donohue [ Mon Oct 30, 2006 2:47 pm ] |
| Post subject: | |
I'm finally getting around to building Paul's jig. I was wondering if there are any official or unofficial revisions to the plan that Michael Payne produced. I thought I'd ask before diving in. TIA...JJ |
|
| Author: | Kim [ Mon Oct 30, 2006 3:00 pm ] |
| Post subject: | |
HERE ya go. Cheers Kim |
|
| Author: | Kim [ Mon Oct 30, 2006 3:03 pm ] |
| Post subject: | |
Oh and you might want to read THIS as well JJ. Cheers Kim |
|
| Author: | JJ Donohue [ Mon Oct 30, 2006 3:11 pm ] |
| Post subject: | |
WOW...that was fast!!! Thanks, Mate
|
|
| Author: | Kim [ Mon Oct 30, 2006 3:19 pm ] |
| Post subject: | |
No worries JJ 
|
|
| Author: | Anthony Z [ Mon Oct 30, 2006 6:04 pm ] |
| Post subject: | |
JJ, you might want to check out this thread as well Holden Modifications |
|
| Author: | Serge Poirier [ Mon Oct 30, 2006 11:02 pm ] |
| Post subject: | |
You guys are "Thread Angels"! 
|
|
| Author: | GregG [ Tue Oct 31, 2006 4:29 am ] |
| Post subject: | |
Does anybody have a picture of this jig in action, I'm having a hard time visualizing how the whole thing works. Makes we wonder how in the heck do some of you guys figure these things out in the first place. Greg |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|